Jackman Mechanical Ltd., home (416) 888-1371Call

For homes

Boiler repair and hot water heating in Toronto

Jackman Mechanical Ltd. troubleshoots, repairs, installs and maintains gas boilers and hot water heating in Toronto homes, and in North York, Mississauga, Markham and Ajax: radiators or in-floor heat that stay cold, some rooms cold, a boiler showing a code, a noisy system, or an old boiler to replace. No heat in cold weather is a call, any hour, at (416) 888-1371.

What will the request form ask about the boiler?

The same three questions as for a furnace; choose "Boiler (radiators or floor)" for the first. The most useful photo is the label inside the boiler's door or cover, and any code on its display.

Questions on the request form for no heat problems
QuestionThe choices
What heats the home?Furnace · Boiler (radiators or floor) · Not sure
How old is it?Under 5 years · 5 to 10 years · Over 10 years · Not sure
What is it doing?Not coming on · Some rooms cold · Blinking light or code · Noisy

Photos that help. The most useful are the label inside the furnace or boiler door, and any blinking light or code.

How does a hot water heating loop work?

Illustration of a hot water heating boiler and its loop A wall-hung gas boiler in the basement. Hot water leaves the boiler, passes an air separator and goes up to two radiators on the floor above, then returns through a circulator pump. A red expansion tank hangs from the loop. A pressure relief valve on the boiler has a discharge line to a floor drain. A tagged gas line feeds the boiler through a shutoff valve with a capped drip leg, and two vent pipes leave the top. BOILER GAS GAS AIR SEPARATOR CIRCULATOR EXPANSION TANK RELIEF LINE GAS SHUTOFF RADIATOR VENTS MAIN FLOORBASEMENT
Illustration of a typical installation, not a drawing of a specific job.

The boiler heats water, a circulator pump moves it up to the radiators or the floor and back, and an expansion tank, an air separator and a relief line keep the loop at a safe pressure. Rooms cold at the far end of the loop, banging or gurgling, or a pressure reading that keeps dropping all point to different parts, so say which you see.

A white wall-hung boiler mounted on a plywood backboard, with copper and black gas piping and labelled valves below it, against a concrete block wall.
From a Jackman Mechanical job: a wall-hung boiler and its piping on a backboard.

Which rules apply to a gas boiler in Ontario?

  • Who may work on it. The TSSA says maintenance of furnaces and fuel-fired appliances must be performed by TSSA-registered contractors, with TSSA-certified gas technicians (TSSA).
  • A yearly inspection. The Government of Ontario asks owners to have fuel-burning appliances, chimneys and vents cleaned and inspected by professionals every year (Government of Ontario).
  • Carbon monoxide alarms beside each sleeping area and on every storey, under the same page. See the alarm guide.
  • A permit to replace it in Toronto. Toronto Building lists a boiler or furnace replacement in a single-family house at $214.79 flat in 2026 (City of Toronto).

Do you work on boilers in apartment and commercial buildings?

Yes. Multi-boiler plants and building heating loops are on the commercial heating page, and landlords should read the rental heat guide. Jackman Mechanical prices each job directly with you; no prices are published on this site.

Send it now, or call.

Emergencies go to the phone, any hour. For anything that can wait, send the details and photos and we reply by text or email.

Call Text Request